Loading ...
Loading ...
Loading ...
EN
27
Cleaning and Maintenance
www.bora.com
8 Cleaning and
Maintenance
Observe all safety and warning information
(see the Safety section).
INFO Clean the stainless steel surfaces in the
polishing direction only.
Regular cleaning and maintenance ensures the
longevity of the product and optimal function.
Adhere to the following cleaning and maintenance
cycles:
Component Cleaning cycle
Cooktop extractor
interior and surface
After cooking very greasy dishes;
at least once a week
Cover plates and
stainless steel grease filter
After cooking very greasy dishes;
at least once a week
Activated charcoal
filter (with recirculation
only)
Replace if odours have built up
or the service life has expired
(see the operating instructions
for the activated charcoal filter)
Tab. 8.1 Cleaning cycles
8.1 Cleaning agents
INFO Due to the use of aggressive cleaning agents
and abrasion caused by the pot bases the
surface will become damaged and dark stains
will occur.
Never use steam cleaners, abrasive sponges, scouring
pads or chemically aggressive cleaning agents
(e.g. oven cleaner spray).
Make sure that the cleaning agent does not contain
any sand, soda, acids, lyes or chloride.
8.2 Cleaning the cooktop extractor
Grease particles and limescale residues from cooking
vapours can settle on the surface and in the extraction
system.
Make sure that the cooktop extractor is switched off
(see the Operation section).
Remove the cover plates and stainless steel grease
filter prior to cleaning.
Clean the cooktop extractor in accordance with the
cleaning cycles.
Clean the surfaces using a soft, damp cloth,
detergent or a mild window cleaning agent.
Soften dried on dirt using a damp cloth
(do not scrape it off!).
8.2.1 Removing the cover plates and the
stainless steel grease filter
Fig. 8.1 Removing the cover plates
Lift the cover plates off upwards.
Fig. 8.2 Removing the stainless steel grease lter
Reach into the opening in the cooktop extractor and
remove the stainless steel grease filter.
8.2.2 Cleaning the cover plates and the
stainless steel grease filter
The cover plates and stainless steel grease filter can
be cleaned manually or in the dishwasher.
Manual cleaning
Use a detergent with a degreasing agent.
Rinse the cover plates and stainless steel grease filter
with hot water.
Clean the cover plates and stainless steel grease filter
with a soft brush.
Rinse the components thoroughly after cleaning.
Loading ...
Loading ...
Loading ...