Loading ...
Loading ...
Loading ...
12ŶEnglish
2TGECWVKQPUHQTRQYGTUWRRN[YKTKPI
Use a round crimp-style terminal for connection to the terminal block for power supply. If it cannot be used due to
unavoidable reasons, be sure to observe the following instructions:
r +PYKTKPIOCMGEGTVCKPVJCVRTGUETKDGFYKTGUCTGWUGFECTT[QWVEQORNGVGEQPPGEVKQPUCPFƂZVJGYKTGUUQVJCVGZVGTPCN
forces are not applied to the terminals.
Attach insulation sleeve
Wiring
Round crimp-style terminal
r Use copper wire only.
r For electric wiring work, refer also to p9KTKPIFKCITCONCDGNq attached to the electrical wiring box cover.
r For remote controller wiring details, refer to the installation manual attached to the remote controller.
r A circuit breaker capable of shutting down power supply to the entire system must be installed.
r 5RGEKƂECVKQPUHQTƂGNFYKTG
The remote controller wiring should be procured locally.
Table 3
Wire Size Length (ft.)
Wiring between units
Wire size and length must comply with
local codes.
––
Remote controller wiring Sheathed (2 wire) AWG 18 - 16 Max.1640*
Wiring to ground terminal
Wire size and length must comply with
local codes.
––
* This will be the total extended length in the system when doing group control.
CAUTION
r Arrange the wires and fix a cover firmly so that the cover does not float during wiring work.
r Do not clamp remote controller wiring together with wiring between units. Doing so may cause malfunction.
r 4GOQVGEQPVTQNNGTYKTKPICPFYKTKPIDGVYGGPWPKVUUJQWNFDGNQECVGFCVNGCUV|KPEJOOHTQOQVJGTGNGEVTKEYKTGU
Not following this guideline may result in malfunction due to electrical noise.
English
Loading ...
Loading ...
Loading ...