FFQ09Q2VJU User Manual

Loading ...

11 ŶEnglish

Indoor Unit Installation

6. Wiring

4GHGTCNUQVQVJGKPUVCNNCVKQPOCPWCNHQTVJGQWVFQQTWPKV

WARNING

r &QPQVWUGVCRRGFYKTGUGZVGPUKQPEQTFUQTUVCTDWTUVEQPPGEVKQPUCUVJG[OC[ECWUGQXGTJGCVKPIGNGEVTKEUJQEMQTƂTG

r Do not use locally purchased electrical parts inside the product. (Do not branch the power for the drain pump, etc., from the

VGTOKPCNDNQEM&QKPIUQOC[ECWUGGNGEVTKEUJQEMQTƂTG

r &QPQVEQPPGEVVJGRQYGTYKTGVQVJGKPFQQTWPKV&QKPIUQOC[ECWUGGNGEVTKEUJQEMQTƂTG

CAUTION

r When connecting the connection wire to the terminal block using a single core

wire, be sure to perform curling.

2TQDNGOUYKVJVJGKPUVCNNCVKQPOC[ECWUGJGCVCPFƂTGU

Good Wrong

r When clamping wiring, use the included clamping material to prevent outside pressure being exerted on the wiring

EQPPGEVKQPUCPFENCORƂTON[9JGPFQKPIVJGYKTKPIOCMGUWTGVJGYKTKPIKUPGCVCPFFQGUPQVECWUGVJGGNGEVTKECNYKTKPI

DQZEQXGTVQUVKEMWRVJGPENQUGVJGEQXGTƂTON[

r Outside the unit, separate the low voltage wiring (remote controller wiring) and high voltage wiring (wiring between units,

ground, and other power wiring) at least 2 in. so that they do not pass through the same place together. Proximity may cause

electrical interference, malfunctions, and breakage.

6KIJVGPKPIVQTSWGHQTVJGVGTOKPCNDNQEMU

r Use the correct screwdriver for tightening the terminal screws. If the blade of screwdriver is too small, the head of the

screw might be damaged, and the screw will not be properly tightened.

r If the terminal screws are tightened too hard, screws might be damaged.

r Refer to the table below for the tightening torque of the terminal screws.

WPKVNDHrHV0rO

Tightening torque

Terminal block for remote controller (6P) 0.58 - 0.72 (0.79 - 0.98)

Terminal block for power supply (4P) 0.87 - 1.06 (1.18 - 1.44)

Loading ...

User Manual - Page 12