Loading ...
Loading ...
Loading ...
UNPACKING AND CHECKING CONTENTS
NEEDED
Medium Screwdriver
Small Screwdriver
Phillips Type
___rewdriver
Wrenches
_,'+'Tr!;iiii_il I:III_,L.'III:II',III!Iii.11'i::]ii_ii'I 3/8 In. 7/16 in.
1/2 in. 9/16 In.
Combination Square 3/4 In.
Model 113.298142 Table Saw is shipped complete in one
carton but DOES NOT INCLUDE Table Extension, Steel
Legs, or motor.
Model 113.298032 Table Saw is shipped complete in one
carton but INCLUDES Two Table Extensions, Steel Legs,
and Motor.
Model 113.298240 Table Saw is shipped complete in one
carton but INCLUDES Two Table Extensions, Steel Legs,
Motor, and Hold Down.
Separate all parts from packing materials and check each
one with the illustration and the list of Loose Parts to make
certain all items are accounted for. before discarding any
packing material.
f any parts are missing, do not attempt to assemble the
table saw. plug n the power cord or turn the switch on
until the missing parts are obtained and are installed
correctly.
Remove the protective oil that is applied to the table top
and edges of the table. Use any ordinary household type
grease and spo_ remover.
CAUTION: Never use gasoline, naptha or similar highly
volatile solvents.
Apply a coat of automobile wax to the table.
Wipe all parts thoroughly with a clean, dry cloth.
WARNING: FOR YOUR OWN SAFETY, NEVER
CONNECT PLUG TO POWER SOURCE OUTLET UNTIL
ALL ASSEMBLY STEPS ARE COMPLETE, AND YOU
HAVE READ AND UNDERSTAND THE SAFETY AND
OPERATIONAL INSTRUCTIONS.
A B ....C
L K J
COMBINATION SQUARE MUST BE TRUE.
STRAIGHT EDGE OF BOARD
3,/4" THICK. THIS EDGE MUST
DRAW LIGHT LINE ON BE PERFECTLY STRAIGHT.
BOARD ALONG THIE EDGE, <_'\x
/
SHOULD BE NO GAP OR OVERLAP
HERE WHEN SQUARE IS FLIPPED
OVER IN DOTTED POSITION.
LIST OF LOOSE PARTS
Item Part Name Qty.
A Blade Guard and Spreader .................. 1
B Rip Fence .............................. 1
C Owners Manual .......................... 1
D Miter Gauge ............................ . 1
E Arbor Nut Wrench* ....................... 1
F Switch w/Key ........................... 1
6 Rip Fence Guide Bar with Rip Scale (Front] .... 1
H Handwheel ............................. 2
J V-Belt 1/2 in. x 41 in.* .................... 1
K Pulley, 2-1/2 in. die., with 5/8 in. bore* ....... 1
L Belt and Pulley Guard ..................... 1
M Belt Guard Clip .......................... 3
N Self-Threading Screw, 10 32 x 1/2 in. long ..... 2
0 Belt GLard Support ....................... 1
P Belt Guard Support Brackel ................ 1
Q Motor Base ............................. 1
R Spreader Rod* . ......................... 1
S Blade Guard Support with Screw* ........... 1
T Spreader Support * ....................... 1
U Rip Fence Guide Bar (Rear) ............ .... 1
V Ri!c Fence Guide Bar Rod .................. 1
"Pkg. of Miscellaneous Smell Parts No. 62751
Consisting of the Following:
W Setscrew Wrench 3/32 in ................ 1
W Setscrew Wrench 1/8 in ................. 1
W Setscrew Wrench. 5/32 in ................ 1
X Self-Threading Nut .................... 2
Y Hex Head Screw, 5/16-18 x 1-3/4 in. long ... 2
Y Hex Head Screw. 5/16-18 x 5/8 in. t0ng .... 3
Y Hex Head Screw, 5/16-18 x 1 in. long ...... 4
Y Hex Head Screw, 1/4-20 x 5/8 in. 10ng ..... 2
Y Hex Head Screw, 5/16-18 x 3/4 in. long ...... 2
*These parts are packaged in Loose Parts Bag No. 62750
LENGTH
Y
s=zE X
/ AA
AB AC
Loading ...
Loading ...
Loading ...