Loading ...
Loading ...
Loading ...
MAINTENANCE
WARNING: FOR YOUR OWN SAFETY, TURN SWITCH
"OFF" AND RIEMOVE PLUG FROM POWER SOURCE
OUTLET BEFORE MAINTAINING OR LUBRICATING
YOUR SAW.
Do not allow sawdust to accumulate inside the saw.
Frequently blow. out any dust that may accumulate inside
the saw cabinet and the motor.
Frequently clean your cutting tools with Craftsman Gum
and Pitch Remover,
A coat of automobile4ype wax applied to the table will
help to keep the surface clean and allow workpieces to slide
more freely.
If the power cord is worn or cut, or damaged in any way,
have it replaced immediately.
Make sure the teeth of the ANTIKICKBACK pawls are
always sharp. To sharpen:
1. Remove blade guard,
2. Rotate pawl toward rear of s_'e_del_rthat teeth are
above top of spreader.
3. Hold spreader with left hand and place pawl over corner
of workbench.
4. Using a small round file (Smooth Cut) sharpen the
teeth.
LUBRICATION
The following parts should be oiled occasionally with SAE
No. 20 or No. 3Q engine oil.
1. Tilt screw threads and Divot nut. (First Clean with
Craftsman Gum & Pitch Remover.)
2 Elevation screw threads and pivot nut. (First Clean with
Craftsman G Jm & Pitch Remover.)
3. Cradle bearing points.
4. Bearing points n guard assembly, miter gauge and rip
fence.
MITER 3UAGE
'_ BEARING POINTS
I|
RECOMMENDED ACCESSORIES
ITEM CAT. NO.
Steel Legs ............................... 9-22235
Steel Stand ............................. .9-22214
Caster Sets ..................... 9-22222 or 9-22221
Solid Table Extension ...................... 9-29957
7 In. Molding Head Set ...................... 9-3217
7 In. Molding Head Set ...................... 9-3218
7 In. Molding Head ......................... 9-3214
Molding/Dado Insert for 7 In.
Dia. Molding or Dado Head . ................ 9-29997
Work Light ............................... 9-2480
Sawdust Colle('tion System .................. 9-29966
35
I IIIIII
ITEM CAT. NO.
Work Light ............................... 9-2481
7 In. Dia. Adjustable Dado Head 9-3261,- 9-3262-9-3263
7 In. Dia. Dada Head ....................... 9-3257
Sanding Wheel ........................... 9-22723
Miter-Gauge Stop Rods ..................... 9-20924
Miter-Gauge Hold-Down Clamp .............. 9-29928
Taper Jig ................................. 9-3233
Universal Jig .............................. 9-3235
Power Tool Know How Handbook
Table Saw .............................. 9-2918
1g-Inch Diameter Sawblades
with 5/8" Bore ....................... See Catalog
Loading ...
Loading ...
Loading ...