Loading ...
Loading ...
Loading ...
Problem solving guide
76
Problem Cause and remedy
The sensor controls do
not respond.
You have selected the Display| QuickTouch| Off
setting. When the oven is switched off, the sensor
controls do not respond.
As soon as the oven is switched on, the sensor
controls will respond. If you want the sensor
controls to respond even when the oven is
switched off, select the Display| QuickTouch| On
setting.
The oven is not connected to the power supply.
Check that the oven plug is correctly inserted into
the socket and switched on.
Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
There is a fault with the controls.
Touch and hold the On/Off sensor control until
the display switches off and the oven restarts.
Press “OK” for 6 secs
appears in the display
when the oven is
switched on.
The system lock has been activated.
You can deactivate the system lock for a
programme by touching the OKsensor control for
at least 6seconds.
If you want to permanently deactivate the system
lock, select theSafety| System lock | Off setting.
Power cut appears in the
display.
There has been a brief power cut. This has caused
the current cooking programme to stop.
Switch the oven off and then back on again.
Restart the cooking programme.
12:00 appears in the dis-
play.
The power supply was interrupted for longer than
150hours.
Reset the time and date.
Max. op. hours reached ap-
pears in the display.
The oven has been operating for an unusually long
time. This has triggered the safety switch-off
function.
Confirm withOK.
The oven is now ready to use.
Loading ...
Loading ...
Loading ...