Loading ...
Loading ...
Loading ...
English 12
After Oven Operation
IMPORTANT:
• Wipe down the oven cavity and the evaporator dish
with the sponge provided and dry well with a soft cloth
after each use.
• Remove food residue and spills from the oven
immediately after the appliance has cooled down.
Burned on residue is very difficult to remove at a later
time.
• Salts are very abrasive and can cause rust spots. The
steam oven cavity can rust if not properly cared for.
Kitchen / Oven Timer
Kitchen Timer
The kitchen timer can be set for up to 23 hours and 55
minutes. The kitchen timer can be used whether the oven
is in operation or not.
Oven Timer
The Oven Timer is intended to mechanically shut the oven
off when the desired cooking time is complete. The
maximum time is 23 hours and 55 minutes.
To set the kitchen or oven timer
1. Press the ENTER button to access the menu.
2. With the “+/–” buttons, move the arrow (>) to TIMERS
and press ENTER.
3. With the “+/–” buttons, move the arrow (>) to
KITCHEN TIMER or OVEN TIMER and press ENTER.
4. Using the “+/–” buttons, select the desired countdown
time in 1 minute increments. Hold down “+/–” button to
set by 5 minute increments.
5. Press ENTER to begin the timer countdown.
Countdown will start after the oven has finished
preheating.
— When the timer reaches “0:00”, the display will emit
a repeated single beep to signal the end of the
countdown.
6. Press any button to disable the beep.
For times longer than one hour (1:00), the remaining time
will show as HR/MIN (e.g., 2:40 min). From less than one
hour to 10 minutes, it shows as MIN/SEC (e.g., 5:40 sec).
The colon (:) in the time display will blink every second
when the countdown time is 10 minutes or more. Below 10
minutes, the time will display in seconds (e.g., 9:53, 8:45,
and so on) with no blinking.
While the timer is operating, pressing CANCEL will lead to
a prompt: “Cancel Timer” on the first line, while the time still
shows on the second line. Press ENTER to stop the
countdown and the timer operation. Press CANCEL to
resume the countdown.
Changing the Cooking Time during Operation
1. Press ENTER.
— The display will show CANCEL OVEN TIMER.
2. Press ENTER to cancel the mode.
3. Press ENTER again to return to the main menu.
4. Using the “+/–” buttons, scroll to OVEN TIMER.
5. Press ENTER to get the blinking (0:00).
6. Using the “+/–” buttons, input the new cooking time.
7. Press ENTER to restart the oven timer.
At the End of Cooking
When the oven timer reaches 0:00, the display will emit a
repeated beep to signal the end of the cooking time. The
beep will continue for 10 seconds, 2 or 5 minutes or until
you turn either the Mode Selector Knob or the Temperature
Control Knob to OFF.
Pressing the CANCEL, + or –, or ENTER buttons will also
disable the beep even if the oven has not been turned to
OFF. Turn the knob to OFF
.
After cooking with a steam-producing mode, remember to
remove and empty the water tank, dry the seal of the tank
lid and the slot. Using the sponge provided with your
appliance (or a comparable soft sponge or cloth), wipe out
the oven and oven door. Remove any remaining water in
the evaporator dish in the bottom of the oven.
Changing the Temperature during Operation
CHANGING DURING PREHEAT: If the new temperature
you choose is higher than the current one, the oven will
resume preheating, recalculating the percentage of preheat
to show progress to the new temperature.
If the new temperature is lower than the current one (or
within 95% of it), the oven will go directly to cooking. The
“Oven Timer” and the remaining countdown time will be
displayed.
35(+($7,1*
R
Loading ...
Loading ...
Loading ...