Loading ...
Loading ...
Loading ...
1110
ADJUSTING HEIGHT
1. Before the dishwasher is placed into the cabinetry, the front legs will be
completely retracted. Place into the cabinetry.
2. Adjust the leg level with a flathead screwdriver to stabilize the dishwasher and
raise it to the enclosure height.
3. Adjust the back leg level with a Philips screwdriver to balance and raise the
dishwasher to the enclosure height.
4. Make sure the dishwasher is plumb. The dishwasher can be positioned with a
small clearance under the counter top.
• For front legs, turn the legs in the direction of the black arrows with a flathead
screwdriver to allow for the dishwasher to move downwards.
• For rear legs, turn the feet in the direction of the black arrows with a flathead
screwdriver to take the dishwasher feet down.
18 ”
If the height of the enclosure is 32 9/32” to 34 9/32”, use short supports as shown
in the figure.
If the height of the enclosure is above 32 9/32", use long supports as shown in the
figure.
The mounting brackets in the plastic bag should be used when the dishwasher is
installed in the cabinetry. Use of any parts other than mounting brackets may result in
damage to property or bodily injury.
General Safety
installing the dishwasher
INSTALLATION
INSTALLATION
Mounting Brackets
Adjusting Height
Mounting Brackets
Place the two mounting
brackets into the top
corner of the dishwasher.
If countertop material is ceramic, etc.If countertop material is wooden, etc.
If necessary (depending
on countertop material),
bend sides of mounting
brackets.
ops.(+50) H=32 9/32” to 34 9/32”
Loading ...
Loading ...
Loading ...