Loading ...
Loading ...
Loading ...
76
• Connect to a properly rated, protected, and sized power supply circuit to avoid
electrical overload.
• The dishwasher is designed for an electrical supply of 120 V (volts), 60 Hz
(hertz), AC, connected to a dishwasher-de dicated, properly grounded, electrical
circuit with a fuse or breakers rated for 15 amperes.
• Electrical supply conductors shall be a minimum of #16 AWG copper wire
rated at 167° F or higher. These requirements must be met to prevent injury and
dishwasher damage. Consult a qualified electrician if in doubt.
• Do not use any extension cord or portable outlet device to connect the
dishwasher to a power supply.
• This appliance must be electrically grounded. In the event of a malfunction or
breakdown, grounding will reduce the risk of electric shock by providing a path
of least resistance for electric current. This appliance is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is installed and grounded in
accordance with all local codes and ordinances.
WARNING: Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check with a qualified
electrician or service representative if there is doubt whether the
appliance is properly grounded. Do not modify the plug provided with
the appliance. If it will not fit the outlet, have a proper outlet installed by
a qualified electrician.
WARNING
Tools which may be needed:
Materials which may be needed:
(Additional materials may be required to comply with local codes)
Hot Water Supply Line - Minimum 3/4” O.D. copper tubing or
metal braided dishwasher supply line.
UL listed conduit connector or strain relief.
Teflon tape or other pipe thread compound to seal plumbing
connections.
Shut-off valve and fittings appropriate for hot water supply line
(copper tubing/compression fitting, or braided hose).
Silicone
Glue
BEFORE INSTALLATION
General Safety
Tools and Materials
Pipe Wrench Wire Cutter Drill
Hole Saw Hammer Wire Stripper
Tape Measure Torx Screwdriver Philips Screwdriver
Adjustable Wrench
Flathead Screwdriver Scissors
Level Brush Pencil
BEFORE INSTALLATION
WARNING
Loading ...
Loading ...
Loading ...