Loading ...
Loading ...
Loading ...
2120
3. As shown below, the cylindrical feet of the adjustable plinth are attached to the
plinth fixing metal parts and shifted through the cavity of the part.
4. Depending on the desired depth, plinth locking (s) is attached to the kick plate
bracket (n).
5. Finally, kick plate brackets (n) are attached to the gaps under the dishwasher
and the installation is complete.
INSTALLATION
Adjusting the Kick plateAdjusting the Kick plate
s.
INSTALLER CHECKLIST
The installer must have completed and checked the following:
• The dishwasher is square and level.
• The dishwasher is fastened securely to the cabinetry.
• The dishwasher door opens and closes freely. The dishwasher door must close
without hitting any cabinetry or counter top.
• The inlet water supply is turned on and checked for leaks.
• The drain hose has been connected and checked for leaks. There must be no
kinks or obstructions in the drain hose.
• The drain hose must be installed with a 28” high drain loop for drain hook-ups
without any air removed.
• The spray arms are free and rotate freely.
• The rinse cycle has been run.
• The water level will be below the filter screen after the end of the wash program.
It is normal to find some water in the drain filter area.
NOTE: If the installer connects the water drain hose to a trap spigot under the sink,
remove the plastic membrane. If the entire membrane is not removed, remaining food
can cause a blockage in the drain hose spigot. Ensure a hose clamp is used to secure
the hose to the spigot.
FINAL INSTRUCTIONS
1. Press the On/Off button to turn the dishwasher on.
2. Power indicator light comes on.
3. Use the Program Select button to choose a washing program.
4. Start the program with the Start/Pause/ Cancel button.
5. Run the dishwasher through one complete cycle. When the wash cycle is
completed, use the On/Off button to turn the dishwasher off.
6. If the dishwasher does not operate properly, refer to the troubleshooting section.
• If dishwasher is not operating properly after following these steps: Contact
ZLINE at 1-614-777-5004 to schedule an authorized service agent to inspect
the new dishwasher for any function related failure.
• The manufacturer warranty does not cover installation, conversion, or customer
education service visits.
INSTALLATION
Installation Checklist
Installation Checklist
Loading ...
Loading ...
Loading ...