Loading ...
Loading ...
Loading ...
1312
24”
If the height of the enclosure is 33 7/8” to 35 7/8”, use short supports as shown in
the figure.
If the height of the enclosure is above 35 7/8”, use long supports as shown in the
figure.
WATER SUPPLY CONNECTION
Water supply may be connected to the dishwasher in one of two ways:
• With metal braided hose.
• With copper tubing
Braided Hose/Copper Tubing
• After connections are made, turn on the water supply to check for leaks.
• Hot water supply line: Use minimum 3/4” O.D. copper tubing or metal braided
dishwasher supply line.
• Water Inlet valve of dishwasher has 3/4”-11.5NH inlet coupling thread
dimension according to ASME B1.20.7-1991.
• When buying a water inlet hose for the dishwasher, please choose the thread
dimension of the inlet hose that is compatible with the indicated water inlet valve
inlet coupling thread dimensi on (3/4”-11.5NH) of the dishwasher.
• Temperatures required for soldering and sweating will damage the dishwasher’s
water inlet valve, so if any such operation is needed, keep the heat source min.
77/8” away from the dishwasher’s water inlet valve.
• There should not be any sharp bends in the water line that may restrict the water
flow.
• Teflon tape or pipe thread compound must be used for sealing the connection.
Before connecting the copper water supply line to the dishwasher, flush it with
hot water to clear any foreign material.
installing the dishwasher
INSTALLATION
INSTALLATION
Adjusting Height
Water Supply Connection
ops.(+50) H=35 7/8” to 37 3/4”
Loading ...
Loading ...
Loading ...