Loading ...
Loading ...
Loading ...
3332
LOADING THE DISHWASHER
Places the dishes into the dishwasher properly is the best for energy consumption,
washing and drying performance.
• Load round and deep items, such as pots with long handles, pot lids, plates,
salad plates, and cutlery sets, into the lower basket.
• The upper basket is designed for dessert plates, salad bowls, cups, and glasses.
• When placing long stem glasses and goblets, lean them against the basket
edge, rack, or glass supporter wire and not against other items. Do not lean
long glasses against one another as they cannot remain steady and may receive
damage. It is better to arrange the thin narrow parts into the middle sections of
baskets.
• Place spoons among the other cutlery sets in order to prevent them from sticking
to one another. Use the cutlery grid in order to obtain the best result. To avoid
any possible injuries, always place such long-handle and sharp-pointed
dishes as serving fork, bread knife, etc. with their sharp points facing down or
horizontally on the baskets.
WARNING: Place dishes into the dishwasher in a way that they will not
prevent the upper and lower spray arms from spinning.
NOTE: Place all large and very dirty items in the lower rack.
WARNING: Do not put items that can absorb water (sponges, household
cloths, etc.) into the dishwasher.
NOTE: Place all containers such as cups, glasses, and pots into the dishwasher with
the opening facing downwards (so that no water can collect).
NOTE: Dishes and cutlery should not be placed above each other.
FILLING THE RINSE-AID AND SETTING
1. To fill the rinse aid compartment, open the rinse-aid compartment cap.
2. Fill the compartment with rinse-aid to the MAX level and then close the cap. Be
careful not to overfill the rinse aid compartment and wipe up any spills.
3. Close the cap until it click. Otherwise, water can enter the rinse-aid reservoir
during a program.
In order to change the rinse-aid setting, follow the below steps before turning on the
dishwasher:
1. Open the door of the dishwasher,
2. Press and hold “Start/Pause + On/Off” key for 3 seconds,
3. The dishwasher gives an audible warning when it is ON,
4. Then, press and hold “Program Selection + Cancel” key until “rA” is represented
on the display, the dishwasher will display the last setting,
5. The amount of rinse aid is adjusted by pressing “Program Selection + Cancel”
key.
6. After the adjustment, turn off (by pressing Start/Pause + On/Off key) the
dishwasher to save the selected rinse-aid amount.
NOTE: If the dishes are not drying properly or are spotted, increase the level. If blue
stains form on the dishes, decrease the level.
5.8.Rinse - aid Usage
NOTE:
5.9 Filling The Rinse-aid and Setting
In order to change the rinse aid level,
follow the below steps before turning on
the machine
NOTE:
Level Brightener Dose Indicator
Level Brightener Dose Indicator
1 Rinse - aid not dispensed r1 is shown on the display
2 1 dose is dispensed r2 is shown on the display
3 2 doses are dispensed r3 is shown on the display
4 3 doses are dispensed r4 is shown on the display
5 4 doses are dispensed r5 is shown on the display
OPERATION OPERATION
Rinse-Aid
Loading the Dishwasher
WARNING
WARNING
Loading ...
Loading ...
Loading ...