Loading ...
Loading ...
Loading ...
6160
TROUBLESHOOTING
POSSIBLE FAULT POSSIBLE FAULT WHAT TO DO
FF Water inlet system failure Make sure the water inlet
tap is open and water is
flowing.
Separate the inlet hose from
the tap and clean the filter of
the hose.
Contact customer service if
the error continues.
F5 Pressure system failure Contact customer service.
F3 Continuous water input Close the tap and contact
customer service.
F2 Inability to discharge water Water discharge hose and
filters may be clogged.
Cancel the program.
If the error continues, contact
customer service.
F8 Heater error Contact for customer service.
F1 Overflow Unplug the dishwasher and
close the tap.
Contact customer service.
FE Faulty electronic card Contact customer service.
F7 Overheating
F9 Divisor position error
F6 Faulty heater sensor
HI High voltage failure
ZLINE Customer Service is available at 1-614-777-5004.
Troubleshooting
TROUBLESHOOTING
FAULT POSSIBLE CAUSE TROUBLESHOOTING
The screen does not come
on.
The breaker is not in the on
position.
Switch the breaker to the on
position.
The supply cord is not
plugged in.
Plug in the supply cord.
The program does not start. Your dishwasher is not
plugged in
Plug your dishwasher in
Your dishwasher is not
switched on.
Switch your dishwasher on
by pressing the On/Off key.
Fuse blown. Check your indoor fuses.
Water inlet tap is closed. Turn on the water inlet tap.
Your dishwasher door is
open.
Close the dishwasher door.
Water inlet hose and
dishwasher filters are
clogged.
Check the water inlet hose
and dishwasher filters and
make sure they are not
clogged.
Water remains inside
the dishwasher.
Water drain hose is clogged
or twisted.
Check the drain hose, then
either clean or untwist it.
Water drain hose comes out
of air gap next to sink.
Drain hose is in the way. Remove drain hose from
disposal, making sure plug is
removed.
The filters are clogged. Clean the filters.
The program is not finished
yet.
Wait until the program is
finished.
No water is coming into the
dishwasher.
The water shut-off is in the on
position.
Switch the water shut-off to
the off position.
Dishwasher stops during
washing.
Power failure. Check main power.
Water inlet failure. Check water tap.
Troubleshooting
Troubleshooting
Troubleshooting
Loading ...
Loading ...