Loading ...
Loading ...
Loading ...
1514
STEAM PROTECTION FOIL
Steam will be output when the dishwasher door is opened during the operation of
the dishwasher and after completion of the working cycle. In order to prevent the
resulting steam from collecting and damaging at the underside of the counter top, use
a steam protection foil included in the plastic bag.
Fitting the Protection Foil
Clean the surface with a damp cloth before applying steam protection to the
underside of the countertop.
Clean the surface with a damp cloth
before applying steam protection to the
underside of the counter top.
CAUTION: Steam protection foil must be
applied where the steam escapes when
door is first opened. Failure to install the
steam protection foil during installation
can lead to damage to the cabinets and
countertop.
PLACEMENT OF DISHWASHER INTO THE OPENING
Now, place the dishwasher into the opening and get ready to connect all hoses and
electrical connections.
• The power-supply receptacle for the appliance shall be installed in a cabinet
or on a wall adjacent to the undercounter space in which the appliance is to be
installed.
• There shall be an opening through the partition between the compartments
specified in the above bullet point that is large enough for the attachment plug
to pass through. The longest dimension of the opening shall not be more than 38
mm (1.5 in).
• The edges of the opening specified in the above bullet point shall, if the partition
is wood, be smooth and rounded, or, if the partition is metal, be covered with an
edge protector provided for this purpose by the manufacturer.
• Care shall be exercised, when the appliance is installed or removed, to reduce
the likelihood of damage to the power-supply cord.
CAUTION: Make sure all hoses are pulled through the side opening of
the cabinet, no hoses are kinked and all slack is taken out as shown in the
figure.
INSTALLATION
INSTALLATION
Steam Protection Foil
Dishwasher Placement
CAUTION
CAUTION
Loading ...
Loading ...
Loading ...