Loading ...
Loading ...
Loading ...
42
Required components/tools:
T20 star screwdriver
Flat head screwdriver
Moving the sensor housing (RS18 & RS24 only)
@5 OPTIONAL — CHANGING OVER DOOR HINGES
G
A
B
C
E
F
D
1 Unclip the reed switch from the housing (A).
2 Unhook the interceptor board harness from sensor
housing so harness is loose (B).
3 Remove the #8x16 screws (2x) from the sensor housing (C).
5 Reinstall the sensor housing using #8x16 screws (2x)
into the pre-drilled holes in the cabinet top panel (E).
6 Clip the reed switch into the sensor housing in the
pocket closest to the centerline of the cabinet (F).
7 Press the harness from the interceptor board into the
forks on the sensor housing (G).
4 Move the sensor housing so that the opposite reed switch
clip is aligned with the center of the cabinet (D).
Loading ...
Loading ...
Loading ...