Loading ...
Loading ...
Loading ...
19
!4 CONNECT TO WATER AND POWER SUPPLY
F
A
WARNING!
The water connection instructions below are intended only for the professional
installer.
WARNING — connect to potable drinkable water supply only.
DO NOT install on line pressure above 120psi (827kPa) or below 22psi (150kPa).
DO NOT use on hot water supply (100°F [38°C max.]).
1 Flush water through the hose prior to connection to the
appliance to remove any debris in the hose.
2 Move the appliance in front of the cabinetry close
enough that you can access behind for power and water
connections.
3 Connect a braided water hose to the water supply valve
(A), and insert the free end of the hose through a hole
at the rear of the plinth (B).
4 Push the hose all the way to the front and connect a
brass adaptor (C).
Note: The adaptor is not required for installation if (1/4”)
6.35mm PEX plastic tubing (optional) is used.
5 Insert the tube end of the adaptor fully into the PRV (D).
6 Secure the connection with a locking clip between the
PRV and hose end of the adaptor (E).
7 At the back of your appliance, connect the power cable
to the power supply (115VAC, 60Hz) (F).
– You will hear a chime sound when the appliance is
powered on and automatically goes into ‘Installer
(standby) mode’.
– Refer to ‘User guide’ for more details on activating
the appliance.
8 Check the connection and open the water supply to test
for leaks.
Note:
The water supply connection is only used for freezer
models.
For dual installation, follow the instructions above for
both first and second appliances.
IMPORTANT!
Old water fittings (hose-sets) should not be reused.
The appliance includes a stainless braided water
line hose.
The shut off valve should be accessible.
Make sure each appliance is connected to a
separate power outlet.
Required components/tools:
Water filter installation kit
– 2x Collet locking clip
– 1x 1/4” (6mm) Brass adaptor
– 1x 1/4” (6mm) Stainless steel braided
hose
– 1x Adaptor tube
C
D
E
B
Rear view from
back of appliance
Loading ...
Loading ...
Loading ...