Loading ...
Loading ...
Loading ...
34
@0 INSTALL DOOR PANELS
Adjust the door panel
Note: All door panels have full axis adjustment to ensure they are flush with adjacent walls.
1 To adjust the height of the door panel relative to the door, use M4 hex key to turn the top
M8 screw (A) clockwise to lower or counter-clockwise to raise the door panel until the gap
with the cabinetry above is 1/8” (3mm).
2 To adjust the depth of the door panel, loosen the side screws (B) from each side and slide
the panel forward/backward. Re-tighten once satisfied.
3 To adjust the door panels further, remove the door panels then loosen the fixing screws for
the hanging bracket and move the bracket sideways to suit. (C)
4 Once satisfied with the door panel position, fully tighten M8 washer and nut to the stud
using a M4 hex key (A).
Fix the locking brackets
1 Loosen the screw at the bottom of the door, and slide the locking bracket out until it
touches the panel (D).
2 Fix the locking bracket to the door panel with 8Gx16 countersunk screw (E).
3 Re-tighten the screw at the bottom of door (F).
Required components/tools:
1x Cross-head screwdriver
M4 Hex key
1/2” (13mm) Spanner
A
C
B
F
E
D
Loading ...
Loading ...
Loading ...