Loading ...
Loading ...
Loading ...
32
USING THE ADMIN & PRIVACY MENU
You can use the TV’s Admin & Privacy menu to restore the TV to its factory default
settings as well as access other administrative settings.
Using the ADMIN & PRIVACY menu, you can:
• Force the system to power off and on
• View system information
• View a customer service support code
• Check for system updates
• Reset the TV to factory settings
• Enable or disable viewing data
• Personalize advertising choices
• View the VIZIO Privacy Policy
• Start or stop the store demo mode
Resetting the TV to Factory Default Settings
All of the on-screen menu settings can be reset to the factory defaults.
To reset the TV to its factory default settings:
Menu > Admin & Privacy > Reset to Factory Settings
1. If you set a system PIN code, enter it when prompted.
2. The TV displays, “Select Reset to restore all TV settings to factory defaults."
3. Highlight Reset and press OK.
4. Wait for the TV to turn off. The TV will turn back on shortly afterward and the
setup process will begin.
Admin & Privacy
Reboot TV
System Information
Support Code
Check for Updates
Reset to Factory Settings
Viewing Data
Advertising
VIZIO Privacy Policy
Store Demo
On
O
Performing a Reboot
A reboot forces the TV to turn off then on again.
Menu > Admin & Privacy > Reboot TV
Viewing System Information
To view technical data and status information about your TV and network
connection:
Menu > Admin & Privacy > System Information
Accessing the Support Code
Retrieve a customer service support code/PIN or access basic TV information to
assist in a customer service interaction.
To retrieve your support code:
Menu > Admin & Privacy > Support Code
Checking for System Updates
To check for a system update:
Menu > Admin & Privacy > Check for Updates
If an update is found, the TV will ask to confirm the update. If no update is found, the
screen will note "The TV is up-to-date."
WARNING: If you reset the TV to the factory default settings, all
change you have made to the settings will be lost. This includes
any wireless or picture settings.
TIP: You can also reset the TV to default setting by pressing and
holding (12 seconds) the power/input button located under the
remote sensor. See
Power/Input Button on page 7.
Loading ...
Loading ...
Loading ...