Loading ...
Loading ...
Loading ...
16
Changing the Picture Aspect Ratio
To change the screen aspect ratio:
Menu > Picture > Aspect Ratio
Use the Navigation buttons to highlight the aspect ratio you wish to apply.
Your TV can display images in different modes:
• Normal (default) — No change to aspect
ratio.
• Stretch
*
— When the 16:9 signal is a 4:3
image with black bars on the left and right,
the image will be stretched to fill the screen.
• Panoramic
*
— Stretches a 4:3 image to fill a
16:9 screen with an algorithm so the center
doesn’t look stretched.
• Wide — Stretches a 4:3 aspect ratio to fill a
16:9 screen. If the signal is a 16:9 image,black
bars are added to the top and bottom.
• Zoom — Expands image both horizontally
and vertically by 14%.
Some programs have black bars on the top and bottom or sides of the screen so the
picture keeps its original shape. Examples include widescreen movies and older TV
programs.
*
Available aspect ratio settings may vary by input source. Panoramic mode is only available for standard
definition TV (480i/480p) and Stretch mode is only available for high definition TV (720p/1080i/1080p).
TIP: The aspect ratio cannot be changed for Ultra HD content or
HDR content.
Adjusting Advanced Picture Settings
To adjust advanced picture settings:
Menu > Picture > Advanced Picture
Use the Navigation buttons to highlight the setting you wish to adjust, then
press the Left/Right Navigation buttons
to change the setting:
• Black Detail — Adjusts the
average brightness of the picture
to compensate for large areas of
brightness.
• Edge Enhancement — Increases the
smoothness of edges.
• Local Contrast — Adjust the contrast
of the picture locally.
• Backlight Control — Dynamically
improves the contrast ratio of the
picture by adjusting the backlight.
• Reduce Noise:
− Signal Noise: Reduces background picture noise when viewing analog
sources. This function helps to correct "speckle" noise with a slight
reduction in sharpness.
− Block Noise: Reduces the side eects of digital compression such as
"blocking" and noise on sharp edges. The High setting will cause a slight
reduction in sharpness.
• Film Mode — Optimizes the picture for watching lms. Select On or O.
• Gamma — Set the shape of the Gamma curve. Use lower Gamma values for
bright room conditions, and higher values when it’s dark.
• Color Calibration — Calibrate colors using HSB, gain, oset, and 20 point
white balance and test or reset colors to defaults.
Advanced Picture
Black Detail
Edge Enhancement
Local Contrast
Backlight Control
Reduce Noise
Film Mode
Gamma
Color Calibration
Off
Low
Low
On
On
2.1 - Normal
Aspect Ratio
Normal
Panoramic
Wide
Zoom
Loading ...
Loading ...
Loading ...