Loading ...
Loading ...
Loading ...
17
To adjust the color management system settings:
1. Use the Navigation buttons on the remote to highlight the Hue, Saturation,
Brightness, Offset, or Gain of the color you wish to adjust, then press the OK
button.
2. Use the Left/Right Navigation buttons to adjust the value. When you are
finished, press the OK button to save the setting.
Adjusting the Color Tuner Settings
The Color Tuner settings allow you to adjust the color management system, 20
point white balance, turn color channels off for testing, and display SMPTE, flat,
ramp, and uniformity analyzer test patterns.
To access the color tuner table:
Menu > Picture > Advanced Picture > Color Calibration > Color
Tuner
To turn color channels o and on:
1. Use the Navigation buttons on the remote to highlight Red, Green, or Blue.
2. Press the OK button to turn the color channel off or on. An X appears over a
color channel that has been turned off.
3. Only two color channels can be turned off at the same time.
Color Tuner
Red Green Blue Cyan Magenta Yellow
Hue 0 0 0 0 25 -14
Saturation -1 5 -4 0 -2 0
Brightness -24 0 -22 0 0 0
WARNING: The Color Tuner, White Balance, and test patterns
allow technicians to manually calibrate the TV. Calibration requires
specialized training, an input with precisely set colors, and a
specialized light meter.
TIP: Any changes made affect the color temperature setting.
Select the preferred color temperature setting first. See
Adjusting
the Color Temperature on page 15.
White Balance Tuner
Red Green Blue
IRE% 5 0 0 0
Oset 0 0 0
Gain 0 0 0
To adjust the White Balance Tuner settings:
Menu > Picture > Advanced Picture > Color Calibration > White
Balance Tuner
1. Use the Navigation buttons on the remote to highlight the Gain and Color values
you wish to adjust, then press the OK button
2. Use the Left/Right Navigation buttons to adjust the value. When you are
finished, press the OK button to save the setting.
To reset the 20 point white balance, oset, and gain to the defaults:
Menu > Picture > Advanced Picture > Color Calibration > Reset
Color Temperature
To show or hide the SMPTE Test Pattern:
Menu > Picture > Advanced Picture > Color Calibration >
Calibration Test > SMPTE Test Pattern
1. To show the SMPTE Test Pattern, use the Navigation buttons on the remote to
highlight O, then use the Left/Right Navigation buttons to select On.
—or—
2. To hide the SMPTE Test Pattern, use the Left/Right Navigation buttons to
select O.
SMPTE Test Pattern
O
Loading ...
Loading ...
Loading ...