Loading ...
Loading ...
Loading ...
You can operate other manufacturers' equipment using
this Projection Display's remote control,
Procedure
1. Connect the e×ternal equipment to the
Projection Display and Power Off the e×ternal
equipment,
2, Press POWER and OK simultaneously for
more than 3 seconds,
• Release the buttons when the equipment selection
buttons start flashing.
3. Select the equipment with the equipment
selection button (VCR, DBS/CBL, DVD).
• The selected button remains lit (other buttons are not lit).
4. Press the NUMBER keys to input the
equipment's 4-digit remote control code,
(p. 58-60)
5, Press POWER to operate the equipment with
the remote control. (p. 57)
• The external equipment turns On.
[] If the equipment does not operate with the
remote control
• When your equipment has a single code
Input the remote control code again
• When your equipment has multiple codes
Change the code with step 4 and test again
[] Return to the TV mode
Press TV.
• Registration will fail if the wrong code is input or it takes more
than 30 seconds to register.
This procedure searches all codes and is called the
"sequence method."
Proce([giFe
1. After step 3, press I_ and POWER to change
the code and test.
• Operate the equipment with the remote control. (p. 57)
• Repeat until the code is found.
• It may take many attempts before the correct code is
found.
2 When the correct code is found, press OK.
56
Loading ...
Loading ...
Loading ...