Loading ...
Loading ...
Loading ...
6. Press A T to select "ANT in".
7. Press 4 I_ to select "Antenna" or "Cable".
8. Press A T to select "Auto".
9. Press OK to display the Auto program menu.
Use this procedure when changing setting of
receiving channels or changing the channel display.
Also, use to add or delete channels from channel list
manually.
Procedure
1. Press MENU to display the Main Menu
screen.
2. Press A T to select "Setup" icon.
3. Press OK to display the Setup menu.
10. Press A T to select "All channels", "Analog
only", or "Digital only'.
11. Press OK to start scan.
4. Press A T to select "Program channel'.
5. Press OK to display the Program channel
menu.
• If Lock (p. 41) has been set, you must enter your
password to display the Program channel menu.
12.After Auto program is complete, the unit will
return to Manual program mode. To place
the channels that were located by auto scan
in memory, move the cursor to "Apply" and
press OK. (p. 27-28)
If OK is not pressed after selecting APPLY,
the channels will not be memorized.
Program channel
6. Press A T to select "Manual".
7. Press OK to enter the Manual program
screen.
• Some channels with very weak signals may be locked into
memory. If desired, these channels can be deleted manually
using the "Manual program setting". (p. 27-28)
• "Auto program" must be done when you select the input
signal for the first time or whenever you change the antenna
configuration.
27
Loading ...
Loading ...
Loading ...