Loading ...
Loading ...
Loading ...
You can adjust the picture when "Input select" is selected
to "PC". (p, 29)
PFoce([l_gFe
1. Press A V to select "PC adjust".
2. Press OK to display the PC adjust menu.
Other detailed picture adjustments can be made.
This function is not available when "Input select" is
selected to "PC", (p, 29)
Procedure
1. Press A V to select "Other adjust".
2. Press OK to display the Other adjust menu.
3. Press A T to select each item.
4. Press 4 _, to adjust each item.
3. Press A T to select each item.
4. Press 4 I_ to adjust each item.
item ' Explanations
Resets all picture adjustments to factory default
Normal
settings.
• H&V : The H and V sync signals are input from
the HD/VD connector.
Sync • On G : Uses a synchronized signal on the Video
G signal, which is input from the G connector.
Dot clock Adjusts horizontal size.
H-Position Adjusts horizontal position.
V-Position Adjusts vertical position
Adjusts in order to remove any picture
Clock phase interference or contour blurring which may occur
tn computer images.
Input Switches to wide display.
resolution Input signal switched from XGA to WXGA and
from VGA to WVGA.
Displays the frequencies of the PC signal
currently being adjusted.
H-Frequency/ Displays the H (Horizontal) /V (Vertical)
V-Frequency frequencies.
Display range: Horizontal 15-110 kHz
Vertical 48 - 120 Hz
• This function is available only when the signal being viewed
is from a PC.
Item i Explanations
Reduces noise, commonly called snow. Leave off
Video NR
when receiving a strong signal.
3D Y/C filter Minimizes noise and cross-color in the picture.
Select SD or HD.
• SD : Color matrix is set same as a normal IV
system (NTSC).
• HD : Color matrix is set same as a
High-Definition system (ATSC).
With a 480p signal from equipment connected
to COMPONENT VIDEO INPUT (Y, PB, PR) or
HDMI INPUT terminals or from the unit's DTV
Color matrix tuner, you can select SD or HD color matrix to
display the most natural color.
Block NR
Mosquito NR
Black level
3:2 pulldown
• This feature is available only with 480p signals.
• The default setting with HDTV signals (720p,
1080i or 1080p) is HD color matrix.
• The default setting with NTSC signals (480i) is
SD color matrix.
Reduces noise of specific digital signals of DVD,
STB, etc.
Reduces HDTV flicker noise in the contoured
sections of an image.
Select Light or Dark [Dark : VIDEO, Light :
480i/480p/72Op/1080i/1080p] Invalid for Digital
channel, Analog channel, PC and Photo viewer.
Transfers film to video.
37
Loading ...
Loading ...
Loading ...