Loading ...
Loading ...
Loading ...
P#'ocedbllw
1. Press TV/VIDEO to display the Input select
menu,
2. Press corresponding NUMBER keys to select
the input of your choice. Or, press • T to
select the input of your choice, then press
OK.
• If, during selection, no action is taken for several seconds,
the Input selection menu is exited and the current input is
automatically selected.
2
3
4
6
7
8
9
0
Signal of source connected to COMPONENT
Component I VIDEO INPUT 1 is displayed.
Signal of source connected to COMPONENT
Component 2 VIDEO INPUT 2 is displayed.
HDMI 1 Signal of source connected to HDMI IN 1 is
displayed.
HDMI 2 Signal of source connected to HDMI IN 2 is
displayed.
HDMI 3 Signal of source connected to HDMI IN 3 is
displayed.
Signal of source connected to VIDEO INPUT
Video 1 1 is displayed.
Signal of source connected to S VIDEO
INPUT is displayed.
Video 2 Signal of source connected to VIDEO INPUT
2 is displayed.
Video 3 Signal of source connected to VIDEO INPUT
3 is displayed.
PC Signal of source connected to PC IN is
displayed.
• [f SKIP is set as the Input Label setting, the mode will not be
changed. (p. 50)
[] Card input mode (Photo viewer) is selected.
Proeedure
1. Press SD to display Photo viewer mode.
I Photo ] of connected to CARD SLOT
Signal
source
/
(Photo viewer)| is displayed.
Switches between the current and last channel or input
modes.
1
PFoce([lgFe
1. Press R-TUNE to switch to previously viewed
channel or input modes.
• When Photo viewer (p. 46) is used, Rapid Tuning is not
available.
[] Select desired channel:
Press CH ^v or NUMBER keys.
[] Adjust to desired volume level:
Press VOL+ or VOL-.
• The channel number and volume level are stored even after
the unit is turned off.
• Power consumption can be reduced if the volume level is
lowered.
29
Loading ...
Loading ...
Loading ...