Loading ...
Loading ...
Loading ...
Channel and Program tuning in digital television differs
from conventional television. With DTV, many programs
can exist within a single 6 MHz channel. These channels
behave as sub-channels within a single channel. When
tuning to a digital channel, the unit will also tune to a
program and will indicate the channel and program in the
on-screen Channel Banner display.
In order to select channels properly, Auto program must
be performed. (p. 26-27)
Follow the procedure below to directly enter the channel
number using the NUMBER keys.
PFoce([lIFe
1. Press the NUMBER keys to enter the Channel
number. Press OK.
• The following is an example of tuning to channel 15.
Direct Tuning Example
Step Action' Channei Banner Display
1 Press 1 1
2 Press 5 15
3 Press OK 15
• If, during channel selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channel is automatically selected.
Pt'oced_Fe
1. If tuning a digital channel and your channel
contains more than one program, press
PROG- and enter the program (1, 2, 3 etc.)
using the NUMBER keys. Press OK.
• The following is an example of tuning to channel 15-1.
Direct Tuning Example
step ' Action
1 Press 1
2 Press 5
3 Press PROG-
4 Press 1
5 Press OK
Channel Banner Display
1
15
15-
15-1
15-1
Press CH ^v or RECALL, except when the MENU
screen is displayed, to display current unit status
information.
Procedblre
1. Press OH ^v to minimize the displayed
channel banner.
• [t will display the channel number, and the station
identification (if available).
Channel Number
Station Identifier
PFocedblre
1. Press RECALL to maximize the displayed
channel banner.
Channel, Program and Station identifier
Program title
Closed Caption Rating Level Picture mode Time remaining
in Sleep Timer
SAP indication Signal resolution Aspect ratio
Press MUTE to instantly mute the sound. Press again to
restore the previous sound level.
PFocedblre
1. Press MUTE to mute the sound. Press again
to reactivate sound.
• Sound is also reactivated when power is turned off or
volume level is changed.
• If, during channel selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channel is automatically selected.
• The audio output from AV OUT is not muted.
30
Loading ...
Loading ...
Loading ...