Loading ...
Loading ...
Loading ...
PROBLEM CAUSE SOLUTION
Fusesor circuitbreakers open
frequently.
1. Motor isovedceded.
2. Fuses orcircuitbreakersare
wrong size or defective.
I. Feed work more slowly.
2. Replace fuses or circuit break-
era,
3. Dull blade. 3. Replace the blade.
Saw vibratesexcessively.
4, Startswitchisdefective,
1, Blade iswarped.
4. Have the switchreplaced.
1, Replace the blade.
2. Belt isdamaged.
2. Replace the belt.
3. Saw isnot mounted securely. 3. Tightenall hardware.
4, Work surface is uneven.
4. Repesitionon a fiat surface.Ad-
just the levelingfeet on legs.
Startswitch does notoperate.
1. Switch contacts are burned out, 1. Have the switch replaced and ra-
quest a voltage check from the
power company.
2, Capacitorisdefective
2, Have the capacitorreplaced,
3. Connectionsare loose or dam- 3. Have the widngchecked and ra-
aged. paired.
Handwheelsare herd toturn.
1, Sawdust has collected on the 1. Clean and lubdoatethe mecha-
mechanisminsidesew. nism.
Blade does notlower when turning
height handwheel.
1. Blade lock handle is not fully 1. Fully release the blade lock
released, handle.
Mitergage doesnotmovesmoothly.
1. Miter gage assembly isdirtyor 1, Raleasethe mitergage knoband
sticky, wax the miter gage base and
sides.
Cutbinds,bumsorstalls motorwhen
ripping.
1, Blade orteeth are dull.
2. Blade is heeling,
1. Sharpen or raplasethe blade.
2. See Heelingthe Sawbladeinthe
Adjustmentssection,
3. Board iswarped. 3. Raplacethe board.
4, Ripfencedoeenotperallalblede. 4, SeaAligningtheRipFenoaintha
Assembly section.
Saw bladedoesnotcuttrueat 90°or
45° positions.
1. Indicators are not properly ad-
justed.
2. Positive stops inside base are
notaccurate.
1, See SettingtheBevel Stopsand
IndicatorintheAdjustmentssec-
tion.
2. Sea SettingtheBevel Stops and
IndicatorintheAdjustmentssec-
tion.
45 I:IUlFTSHRN TABLESAW315,2283_
Loading ...
Loading ...