Loading ...
Loading ...
Loading ...
MAKING A COMPOUND (BEVEL) MITER CUT
See Figure 54.
Practice on scrap wood. Fromthe frontof the saw,
pushthe woodto the blade withthe mitergage. Do
notuse the ripfence,
• 1=WARNING: Make surethe bladeguard is
loweredover blade and is workingpropedyto
prevent possibleinjury.
• Set the bladeangle and heightby looseningthe
bevel lockhandle and turningthe heightand bevel
handwheels.Retightenthe bevel lock handle.
_lh WARNING: When blade isangled tothe left,
the miter gage must be onthe dgntsideof the
blade. Othew/ise the gage couldtrap the
workplece, possibly causingkickbackand
resulting in injuly.
• Set the woodanglo by looseningthe mitergage
knoband settingittothe desiredangle.
• Retightenmitergage knob.
• Placea supportthe same heightas the top ofthe
sew table behindthe sew for the cutwork.
• Make sumthe wood isnottouchingthe blade.
• Insertthe key and llftthe switchtothe ON position,
Letthe bladebuildup tofull speed.
• Holdthe workfirmlyagainstthe mitergage and
pushthemiter gage to feed thework into the blade.
• When thework iscompleted,pressthe switchoff
and removethe key.
COMPOUND(BEVEL)MITERCUT
WHENMITERGAGEIS
ON RIGHTSIDEOF BLADE
PLACELEFT HANDON
MITERGAGEKNOB HERE
PLACERIGHTHAND
OHWORKPIECEAND
MITERGAGEHERE
Fig. 54
CRflFrsM RN"TABLESAW318.228390 40
Loading ...
Loading ...
Loading ...