Loading ...
Loading ...
Loading ...
W415-2362 / A / 10.25.19
EN
36
electrical information
6.4 receptacle wiring diagram
L1 (BLACK)
L2 (WHITE)
CABLE
CONNECTOR
ELECTRICAL
BOX COVER
ELECTRICAL BOX
WIRE NUTS
(BLACK)
GROUND
(GREEN)
(WHITE)
3 PRONGE
RECEPTACLE
SCREW
CONTROL
BOX
NOTE: RECEIVER WIRE IS BUNDLED UP IN THE CONTROL BOX AND
NEEDS TO BE INSTALLED REMOTELY. FOR INSTALLATION SEE
“REMOTE RECEIVER INSTALLATION” SECTION.
TO REMOTE RECEIVER
GROUND
(GREEN)
6.5 remote receiver installation
Receiver must be located
within 8 feet (2.4m) of this side
of the appliance and must be
accessible for
programming the remote.
Install the receiver into a
standard electrical switch
box. Determine an
appropriate location and
install the electrical box.
NOTE: Ensure the three
position slider switch is
in the “REMOTE”
position (middle).
(4) AA Batteries
ON REMOTE OFF
(4) AA Batteries
ON REMOTE OFF
Loading ...
Loading ...
Loading ...