Loading ...
Loading ...
Loading ...
EN
W415-2362 / A / 10.25.19
25
framing
4.3 steel stud framing kit
8
3
2
5
6
7
4
10
9
11
1
REF NO. PART NO. DESCRIPTION DIMENSIONS QTY
1 W585-0269 STUD SHIELD 1” x 2” x 4.4FT (25mm x 50.8mm x 1.35m) 2
2 W650-0017 STUD, OUTSIDE STEEL
1 1/2” x 3 1/2” x 4.1FT (38mm x 88.9mm x 1.24m) 4
3 W650-0041 STUD, INSIDE STEEL
1 1/2” x 3 1/2” x 4.1FT (38mm x 88.9mm x 1.24m) 4
4 W650-0028 STUD, BOTTOM STEEL
1 1/2” x 3 1/2” x 7 1/2” (38mm x 88.9mm x 190.5mm) 4
5 W650-0020 STUD, CENTER STEEL
1 1/2” x 3 1/2” x 13 3/8” (38mm x 88.9mm x 34cm) 4
6 W650-0026 STUD, TOP STEEL
1 1/2” x 3 1/2” x 4.5FT (38mm x 88.9mm x 1.4m) 2
7 W650-0027 STUD, HEADER PLATE 1 1/2” x 3 1/2” x 3.5FT
(38mm x 88.9mm x 1.06m) 2
8
W570-0024 SCREW #8 x 1/2” 64
9 W475-0868 CEMENT BOARD SIDE PANEL 1/2” x 7 1/2” x 4.1FT (13mm x
19.1cm x 1.24m) 4
10 W475-0867 CEMENT BOARD CENTER PANEL 1/2” x 15 1/2” x 3.2FT (13mm x 39.4cm x 0.99m) 2
11 W570-0017 SCREW #6 x 1” 30
4.3.1 inside frame assembly
A. Lay out inside steel studs (3) and center steel studs (5)
on a large fl at surface.
B. Using the screws provided (8), attach the top steel
header (6) to the inside steel studs (3) and to the center
steel studs (5) on both edges.
C. Attach header plate stud (7) to the inside steel studs (3).
3
3
5
6
7
NOTE: Ensure that narrow
edge of the stud is facing
the fireplace.
!
WARNING
• Edges are sharp, always wear gloves when working with sheet metal.
Loading ...
Loading ...
Loading ...