Loading ...
Loading ...
Loading ...
EN
W415-2362 / A / 10.25.19
31
fi nishing
5.0 fi nishing
5.1 safety barrier removal / installation
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with the
appliance and must be installed.
Lift the safety barrier assembly off the four shoulder screws, pull up and out to remove from the appliance.
Reverse these instructions to re-install the trim with safety screen. Ensure the safety screen is installed correctly.
SAFETY SCREEN
SAFETY SCREEN
!
WARNING
• Risk of fi re!
• Never obstruct the front opening of the appliance.
• The front of the appliance must be fi nished with any non-combustible materials such as brick, marble, granite,
etc., provided that these materials do not go below the specifi ed dimension, as illustrated.
• Do not strike, slam, or scratch. Do not operate appliance with glass removed, cracked, or scratched.
• Facing and/or fi nishing material must never overhang into the appliance opening.
• The glass door assembly is a safety device designed to pivot forward when relieving excess pressure that
might occur. Finishing or other materials must not be located in the opening surrounding the door as this will
interfere with the doors ability to relieve pressure.
• If applicable, drywall dust will penetrate into the blower bearings, causing irreparable damage. Care must
be taken to prevent drywall dust from coming into contact with the blower or its compartment. Any damage
resulting from this condition is not covered by the warranty policy.
Loading ...
Loading ...
Loading ...