Loading ...
Loading ...
Loading ...
www.insigniaproducts.com
8
ELECTRICAL WARNINGS
GROUNDING INSTRUCTIONS
INSTALLATION WARNINGS
Comply with the following electrical instructions and requirements to avoid death, personal injury from
electric shock, and/or property damage from fire:
1 Plug into a grounded 3-prong outlet.
2 DO NOT remove ground prong.
3 DO NOT use an adapter.
4 NEVER use an extension cord.
Use a dedicated 120-volt, 60-Hz, 20-amp, AC, fused electrical circuit for this appliance. A time-delay fuse
or circuit breaker is recommended. DO NOT plug more than one appliance in this circuit.
The range is supplied with a 3-prong grounded plug. This cord MUST be plugged into a mating,
grounded 3-prong outlet that meets all local codes and ordinances. If you are unsure your electrical
outlet is properly grounded, have it checked by a licensed electrician.
If codes permit the use of a separate ground wire, it is recommended that a qualified electrician
determine the proper path for this ground wire.
Electrical service to the range must conform to local codes. Barring local codes, it should meet the latest
ANSI/NFPA No. 70 – Latest Revision (for the U.S.) or the Canadian Electrical Code CSA C22.1 – Latest
Revisions.
It is the personal responsibility of the appliance owner to provide the correct electrical service for this
appliance.
NEVER connect ground wire to plastic plumbing lines, gas lines, or hot water pipes.
DO NOT modify the plug provided with the appliance.
Grounding a range with a cord connection:
This appliance must be Earth grounded. In the event of a malfunction or breakdown, grounding will
reduce the risk of electrical shock by providing a path for the electric current. This appliance is equipped
with a cord having a grounding plug. The plug must be firmly plugged into an outlet that is properly
installed and grounded in accordance with the local codes and ordinances.
Improper connection of the grounding plug can result in a risk of electric shock. Check with a qualified
electrician if you have any doubt the appliance is properly grounded.
NEVER modify the plug provided with the appliance. If it does not fit the existing outlet, have a qualified
electrician install a proper outlet.
Any adjustment and service should be performed only by qualified gas range installers or service
technicians.
Be sure your range is correctly installed and adjusted by a qualified service technician or installer for the
type of gas (natural or LP) that is to be used. To utilize LP fuel source, the 5 surface burner orifices, 2 oven
orifices must be exchanged with the provided LP orifice set, and the GPR adapter must be reversed.
These adjustments must be made by a qualified service technician in accordance with the
manufacturers instructions and all codes and requirements of the authority having jurisdiction. Failure
to follow these instructions could result in serious injury or property damage. The qualified agency
performing this work assumes responsibility for the conversion.
Do not attempt to repair or replace any part of your range unless it is specifically recommended in this
manual. All other service should be referred to a qualified technician.
WARNING
WARNING
WARNING
Loading ...
Loading ...
Loading ...