Loading ...
Loading ...
Loading ...
www.insigniaproducts.com
43
4.8 Cu. Ft. Freestanding Gas Convection Range with Steam Cleaning
9 Replace the burner grates on top of the range cooktop.
10 Push in and turn each surface burner control knob to the LITE position, let each burner light, then set each control
knob back to a burner setting to make sure each burner operates correctly.
Cleaning the cooktop
The cooktop surface is a porcelain-enamel surface. To prevent this surface from becoming dull, wipe up and clean spills as
they happen. Foods with a lot of acid (for example, tomatoes, sauerkraut, and fruit juices) or foods with high sugar content
can cause dull spots if allowed to set.
1 Make sure that all surface burners are OFF.
2 When surfaces have cooled, remove the burner grates.
3 Clean the cooktop surface with warm, soapy water and a soft, damp cloth. If a spill goes under a surface burner, remove
the surface burner cap and head to access and clean the spill. See Cleaning surface burner grates and assemblies
on
page 41
.
4 Rinse with clean water, then dry and polish with a soft, dry cloth.
5 Reassemble burner components (if removed) and replace the burner grates.
WARNING: Do not use a steel-wool pad or abrasive cleaners on stainless steel surfaces. Abrasive pads and cleaners will scratch the
surface and damage the finish.
WARNING: Do not remove or lift the cooktop during cleaning. Doing so could damage the gas lines leading to the surface burner
manifolds, causing poor or dangerous operation.
Loading ...
Loading ...
Loading ...