Loading ...
Loading ...
Loading ...
26
Self-cleaning surfaces
The back wall, side walls and ceiling of the cooking
compartment are coated with a highly porous ceramic layer.
This coating absorbs and disintegrates splashes from baking
and roasting while the oven is in operation.
The higher the set temperature and the longer the oven is in
operation, the better the cleaning result. Large splashes only
disappear after the oven has been used several times.
Residues can be removed with water and a soft sponge.
Colour variations on the self-cleaning surfaces have no effect
on the self-cleaning function.
Caution!
■ Damage to surfaces on self-cleaning areas due to applying
oven cleaner.Never clean the self-cleaning surfaces with oven
cleaner.
If oven cleaner accidentally gets onto self-cleaning surfaces,
remove it immediately with a sponge and plenty of water.
■ Damage to surfaces on self-cleaning areas due to the use of
abrasive and acidic cleaning agents and aids.
Do not use cleaning agents containing abrasive substances
or acids.
Do not use abrasive cleaning aids such as steel wool or
scourers.
Oven cleaning
The back wall, ceiling and side walls of the cooking
compartment are coated with a highly porous ceramic layer.
This coating absorbs and disintegrates splashes from baking
and roasting while the oven is in operation.
If these self-cleaning surfaces (rough surfaces) in the oven no
longer clean themselves adequately, they can be regenerated
using the
z Oven cleaning operating mode.
: Risk of burns!
The appliance becomes very hot during Oven cleaning. Keep
children away from the appliance.
Preparing for oven cleaning
1. Remove accessories and hook-in racks, telescopic shelves
or separate fitting systems from the cooking compartment.
2. Clean the enamel surfaces (smooth surfaces) to avoid any
lasting stains (see section: Cleaning and care).
Starting oven cleaning
1. Set the operating mode selector to zOven cleaning.
2. Turn the temperature selector to set the desired cleaning
setting.
õ Main oven
Your setting is automatically accepted after 10 seconds and
Oven cleaning starts.
x and the selected operating time
setting light up on the clock display. The operating time cannot
be changed.
You can activate the preselection mode in the 10 seconds
before Oven cleaning starts.
When the Oven cleaning has finished, a signal sounds,
‹:‹‹
appears on the clock display and the
y symbol flashes.
ô Top oven
Your setting is automatically accepted after 10 seconds and
Oven cleaning starts.
Once Oven cleaning is complete, a signal will sound and the
cleaning setting goes out on the temperature display.
Ending/cancelling oven cleaning
õ Main oven
1. Turn the operating mode selector back to the Û position.
2. Press the KJ clock function button.
The appliance is switched off.
Top oven
ô
Turn the operating mode selector back to the
Û position.
The appliance is switched off.
Removing and fitting the appliance door
You can remove the appliance door to clean it more
thoroughly.
: Risk of injury!
The hinges of the appliance door may snap shut with great
force. Always open the hinge locking lever fully when removing
the appliance door and close it fully after refitting. Do not reach
into the hinge.
: Risk of injury!
If the appliance door has only been unhinged on one side, do
not reach into the hinge. The hinge can snap back with great
force. Call the aftersales service.
Removing the appliance door
1. Open the appliance door fully.
2. Open the locking levers on the left and right-hand side fully.
The hinges are secured and cannot snap closed.
3. Close the appliance door until resistance becomes
noticeable (figure A)
4. With both hands, grip the door on the left and right-hand side,
close the door a little more and pull it out (figure B).
Cleaning setting Temperature dis-
play
Clock display
(cooking time in
hours)
low
‚‹:…†
medium
ƒ‚:‹‹
intensive
„‚:‚†
Cleaning setting Temperature dis-
play
Oven cleaning time
low
‚
45 minutes
medium
ƒ
60 minutes
intensive
„
75 minutes
$ %
Loading ...
Loading ...
Loading ...