Loading ...
Loading ...
Loading ...
33
To prevent activating the control panel during cleaning,
unplug the range. Clean up splatters with a damp cloth
using a glass cleaner. Remove heavier soil with warm,
soapy water. Do not use abrasives of any kind.
It is best to clean the manifold panel after each use
of the range. For cleaning, use a damp cloth and mild
soapy water or a 50/50 solution of vinegar and water.
For rinsing, use clean water and polish dry with a soft
cloth.
• Do not use abrasive cleansers, strong liquid cleaners,
plastic scouring pads or oven cleaners on the manifold
panel. Doing so will damage the nish.
• Do not try to bend the knobs by pulling them up or
down or by hanging a towel or other objects on them.
This can damage the gas valve shaft.
• The control knobs may be removed for easy cleaning.
• To clean the knobs, make sure that they are in the OFF
position and pull them straight o the stems.
• To replace the knobs, make sure the knob has the
OFF position centered at the top, and slide the knob
directly onto the stem.
To prevent scratching, do not use abrasive
cleaners on any of these materials.
Do not hand clean the
oven door gasket
Hand clean the door
Do not hand clean the
oven door gasket
Hand clean the door
• Use soapy water to thoroughly clean the oven door.
Rinse well. immerse the door in water.
• You may use a glass cleaner on the outside glass of the
oven door. spray water or glass cleaner on
the door vents.
• use oven cleaners, cleaning powders, or harsh
abrasive cleaning materials on the outside of the oven
door.
• clean the oven door gasket. The oven door
gasket is made of a woven material that is essential for
a good seal. Care should be taken not to rub, damage,
or remove this gasket.
Do not use cleaners or harsh abrasive cleaning
materials on the outside of the oven door. Doing so can
cause damage.
Loading ...
Loading ...
Loading ...