Loading ...
Loading ...
Loading ...
VII
!
122
When the cruise control is in
operation, pay attention if you
press and hold one of the pro-
grammed speed adjustment buttons:
this can result in a very rapid change
in the speed of your vehicle.
Do not use the cruise control on slip-
pery roads or in heavy traffi c.
On a steep descent, the cruise control will
not be able to prevent the vehicle from
exceeding the programmed speed.
To prevent the mat from becoming
caught under the pedals:
- ensure that the mat is positioned
correctly,
- never fi t one mat on top of another.
To deactivate the cruise control:
) Press the brake or clutch pedal, or
) Press button 1 "ON OFF" , or
) Press button 4 "CANCEL" .
The cruise control may be deactivated
automatically:
) When the vehicle reaches a speed
below 20 mph (35 km/h).
)
When the active stability control system
(ASC) comes into operation.
Reactivatin
g
the function
When the cruise control has been de-
activated, you can return to the stored
speed by pressing button 3 "ACC RES"
when you reach a minimum speed of
25 mph (40 km/h).
Decreasin
g
the pro
g
rammed
s
p
eed
) Using button 2 "COAST SET" :
- successive presses decrease the
speed in steps of approximately
1 mph (1.6 km/h).
- a maintained press of this button
decreases the speed progressively.
Once the speed required has been
reached, release the button, the new
speed is stored.
) Using the brake pedal:
- brake to deactivate the cruise control,
then press button 2 "COAST SET" .
Release to store the new speed.
Temporar
y
acceleration
/
deceleration
Increasin
g
the pro
g
rammed
s
p
eed
) Using button 3 "ACC RES" :
- successive presses increase the
speed in steps of approximately
1 mph (1.6 km/h).
- a maintained press of this button
increases the programmed speed
progressively.
Once the speed required has been
reached, release the button, the new
speed is stored.
) Using the accelerator pedal:
- accelerate to reach the speed re-
quired, then press button 2 "COAST
SET" . Release the button to store
the new speed.
Temporary acceleration
Press the accelerator pedal as normal.
When the pedal is released, you return
to the stored speed.
Temporary deceleration
Press the brake pedal to reduce the
speed. To return to the stored speed,
press button 3 "ACC RES" .
Loading ...
Loading ...
Loading ...