Loading ...
Loading ...
Loading ...
VI
S
AFETY
1
06
Front seat belt not fastened/
unfastened warning lamp
When the ignition is switched
on, this warning lamp comes
on accompanied by an au-
dible signal for a few seconds
if the driver has not fastened
their seat belt.
R
ear seat belts
Each rear seat is fi tted with a three-point
inertia reel seat belt with force limiter.
Fastening
) Pull the strap, then insert the tongue
in the buckle.
) Check that the seat belt is fastened
correctly by pulling the strap.
Unfastening
) Press the red button on the buckle.
If the driver does not fasten their seat
belt within one minute after switching on
the ignition, the warning lamp fl ashes
accompanied by an intermittent audible
signal and a display on the instrument
panel screen.
The warning lamp, the audible signal
and the display stop after approximate-
ly 90 seconds and return until the driver
fastens their seat belt.
If the seat belt is unfastened while the
vehicle is moving , you are alerted by
the same warnings.
Storin
g
after use
1. Pass the seat belt under the support A
located on each rear side pillar,
2. Insert the tongue in the slot B of the
support.
Rear buckles
) Store the buckles in the locations A
and B provided for this purpose in
the rear seat cushion.
Driver's seat belt
Outer rear seat belts
Front passenger's seat belt
When the ignition is switched on, this
warning lamp comes on the centre
console panel.
It is accompanied by an audible signal
for a few seconds if the passenger has
not fastened their seat belt.
If the seat belt is unfastened while the
vehicle is moving , you are alerted by
the same warnings.
Loading ...
Loading ...
Loading ...