User Manual - Page 606

For 2019 VOLVO V90 CROSS COUNTRY.

Loading ...
Loading ...
Loading ...
||
MAINTENANCE AND SERVICE
604
Unscrew the cover in the plastic covering.
Unscrew the expansion tank cap and fill
coolant as needed. The level should not
exceed the yellow MAX mark inside the
expansion tank.
Put the components back in place in the reverse
order.
CAUTION
•
Do not ingest the contents. May cause
damage to organs (kidneys).
•
Use premixed coolant according to Vol-
vo's recommendations. If concentrated
coolant is used, make sure that the cool-
ant mixture is 50% coolant and 50%
water of acceptable quality.
•
Do not mix different types of coolant.
•
To help ensure sufficient corrosion pro-
tection in the system, only use new cool-
ant when replacing larger components in
the cooling system.
•
Never run the engine unless the cooling
system is properly filled. An improperly
filled cooling system could lead to high
temperatures and cracks in the cylinder
heads.
•
High levels of chlorine, chlorides and
other salts may cause corrosion in the
cooling system.
Related information
•
Engine compartment overview (p. 600)
•
Coolant specifications (p. 657)
Replacing bulbs
The bulbs in the halogen headlights, backup
lights and rear fog light can be changed without
the help of a workshop.
Halogen headlights are not available on all mod-
els and markets. Contact a Volvo retailer for
more information.
LED
14
bulbs must be replaced by a workshop.
An authorized Volvo workshop is recommended.
NOTE
For information on lights not mentioned in
this article, contact a Volvo dealer or a certi-
fied Volvo service technician.
The bulbs in the halogen headlights can be
changed without the help of a workshop. Before
a bulb can be replaced, the plastic covering over
the headlight must be removed.
If you are experiencing problems with any lights
other than light bulbs, contact a workshop
15
. If
there is a problem with an LED
14
light, the entire
lamp unit will normally need to be replaced.
WARNING
The vehicle electrical system must be in igni-
tion mode 0 when bulbs are replaced.
Loading ...
Loading ...
Loading ...