Loading ...
Loading ...
Loading ...
DRIVER SUPPORT
}}
* Option/accessory.
295
Distance Alert*
29
The Distance Alert
30
function can help the driver
become aware if the time interval to the vehicle
in front is too short.
However, the vehicle must be equipped with a
head-up display in order to display the Distance
Alert, which will then be indicated by a symbol
on the windshield as long as the time interval to
the vehicle ahead is shorter than the set time
interval.
Distance Alert is active at speeds above 30 km/h
(20 mph) and only reacts for vehicles ahead mov-
ing in the same direction as your vehicle. No dis-
tance information is provided for oncoming, slow-
moving or stationary vehicles.
NOTE
•
Distance Alert is only available in vehicles
that can display information on the wind-
shield with a head-up display.
•
Distance Alert is deactivated while Adap-
tive Cruise Control or Pilot Assist is
active.
WARNING
Distance Alert only reacts of the time interval
to the vehicle ahead is shorter than the preset
value – vehicle speed is not affected.
Related information
•
Head-up display for Distance Alert (p. 295)
•
Activating/deactivating Distance Alert
(p. 296)
•
Setting a time interval for Distance Alert
(p. 296)
•
Distance Alert limitations (p. 297)
Head-up display for Distance Alert
31
In vehicles equipped with a head-up display*, a
symbol will be displayed on the windshield as
long as the time interval to the vehicle ahead is
shorter than the set time interval.
Distance Alert warning symbol on the windshield
32
.
For this to be possible, however, the Show
Driver Support function must be activated
under Settings in the center display's menus (see
"Head-up display" for instructions).
29
The Distance Alert function is only available in vehicles that can display information on the windshield with a head-up display.
30
Distance Alert
31
The Distance Alert function is only available in vehicles that can display information on the windshield with a head-up display.
32
Note: This illustration is general and details may vary depending on model.
Loading ...
Loading ...
Loading ...