Loading ...
Loading ...
Loading ...
LOADING, STORAGE AND PASSENGER COMPARTMENT
}}
* Option/accessory.
583
Retracting the cover
1. From the fully opened position:
Lift the cover's handle and pull it rearward to
release the cover's attaching pins from the
grooves. Let the cover retract.
From the partially retracted position:
Grasp the handle and pull the cover out of
the groves to the fully open position. Lift the
handle and pull it rearward to release the
cover's attaching pins from the grooves. Let
the cover retract.
2. Let the cover retract with its attaching pins
above the side panels until it stops in the
fully retracted position.
Keep in mind that a retracted cover could reduce
rearward visibility.
Related information
•
Installing and removing the cargo compart-
ment cover* (p. 580)
Installing and removing the steel
cargo grid*
The steel cargo grid helps prevent loads or pets
in the cargo compartment from being thrown for-
ward into the passenger compartment.
For safety reasons, the steel grid must always be
installed and secured correctly.
WARNING
Under no circumstances may a person be in
the cargo compartment when the vehicle is
moving. Heavy braking or a collision could
lead to serious injury.
Installation
CAUTION
The steel cargo grid may only be used in the
rear position (behind the rear seat) described
here.
Before installing the steel grid, the existing plas-
tic ceiling mounting consoles must be replaced
with steel consoles. Volvo recommends that the
ceiling consoles are only replaced by an author-
ized Volvo workshop or retailer.
1. Fold down the rear seat backrests.
2. Make sure that the steel grid is facing the
right direction. Lift the grid into the vehicle
through one of the rear doors.
Loading ...
Loading ...
Loading ...