Loading ...
Loading ...
Loading ...
STARTING AND DRIVING
* Option/accessory.
469
www.HomeLink.com, www.youtube.com/
HomeLinkGentex or call 1-800-355-3515.
Programming individual buttons
To program an individual HomeLink
®
button:
1. Press and hold the desired button for about
20 seconds.
2.
When the indicator light on HomeLink
®
starts flashing slowly, it is possible to pro-
gram as usual.
Note: If the button you are reprogramming
does not program with a new device, it will
return to the previously saved programming.
Resetting the HomeLink
®
buttons
It is only possible to reset all HomeLink
®
buttons
at once. It is not possible to reset individual but-
tons. Individual buttons can only be reprogram-
med.
–
Press and hold the outer buttons (1 and 3)
on HomeLink
®
for about 10 seconds.
> When the indicator light goes from a
steady glow to flashing, the buttons have
been reset and are ready for reprogram-
ming.
Related information
•
Using HomeLink
®
* (p. 469)
•
HomeLink
®
* (p. 467)
•
Type approval for HomeLink
®
* (p. 470)
Using HomeLink
®
*
17
Once HomeLink
®
is programmed, it can be
used instead of the separate remote controls.
Press and hold the programming button. The
garage door, gate, alarm system, etc. will be acti-
vated (this may take several seconds). If the but-
ton is held down for more than 20 seconds,
reprogramming will begin. The indicator light will
glow steadily or flash when the button has been
pressed. The original remote controls may be
used concurrently with HomeLink
®
if desired.
NOTE
If the ignition is off, HomeLink
®
works for
30 minutes after the driver's door has been
opened.
WARNING
•
If you use HomeLink
®
to open a garage
door or gate, be sure no one is near the
gate or door while it is in motion.
•
Do not use HomeLink
®
with any garage
door opener that lacks safety stop and
reverse features as required by US fed-
eral safety standards (this includes any
garage door opener model manufactured
before April 1, 1982). A garage door that
cannot detect an object - signaling the
door to stop and reverse - does not meet
current U.S. federal safety standards. For
more information, contact HomeLink at:
www.homelink.com.
Related information
•
HomeLink
®
* (p. 467)
•
Programming HomeLink
®
* (p. 468)
•
Type approval for HomeLink
®
* (p. 470)
Loading ...
Loading ...
Loading ...