Loading ...
Loading ...
Loading ...
40
4. Remove the water lter cap from the water lter.
5. Install the water cap lter in the new lter. Make sure that you
align the arrows so that the slots on the lter match the tracks
on the lter cover.
6. Insert the lter into the housing.
7. Twist the water lter and rotate it 90° clockwise until it locks
into place and the arrows are aligned.
8. Push the water lter door closed.
ICE MAKER AND STORAGE BIN
■ Allow 24 hours to produce the rst batch of ice. Discard the
rst three batches of ice produced.
■ The quality of your ice will be only as good as the quality of
the water supplied to your ice maker. Avoid connecting the ice
maker to a soft water supply. Water-softener chemicals (such
as salt) can damage certain parts of the ice maker and lead to
poor-quality ice. If a softened water supply cannot be avoided,
make sure that the water softener is operating properly and is
well maintained.
■ Do not use anything sharp to break up the ice in the storage
bin. This can cause damage to the ice container and the
dispenser mechanism.
■ Do not store anything on top of or inside the ice maker or
storage bin.
Turning the ice maker On/Off
Style 1
■ To turn on the ice maker, lift the ice maker door and lower the
wire closing arm to the On position (down).
■ To turn off the ice maker manually, lift the wire closing arm
to the Off position (up) and you will hear a click. You can still
remove ice from the maker but you cannot make any more.
NOTE: Your ice maker has an automatic shut-off feature.
Asice is produced, the ice cubes will ll the storage bin and
will raise the wire closing arm to the OFF position (up). Do not
force the wire closing arm upwards or downwards.
Removing and Replacing the Ice Storage Bin:
1. Lift and hold open the ice maker door.
2. Lift the wire closing arm until it hooks into the Off position
(up). Release the ice maker door.
3. Lift up the front of the storage bin and pull it out.
4. Replace the bin by pushing it in all the way, or the dispenser
will not work.
5. To resume ice production, lift the ice maker door to open it
and push the wire closing arm down to the On position.
Loading ...
Loading ...
Loading ...