Loading ...
Loading ...
Loading ...
125
3-2. Opening, closing and locking the doors
HIGHLANDER_U
3
Before driving
tem is enabled. (P.515)
● When the engine switch is in ON,
one of the following conditions
must be met in addition to the
above conditions:
• The parking brake is engaged.
• The brake pedal is depressed.
• The shift lever is in P.
■ Operation of the power back
door
● When the power back door begins
to operate, the emergency flash-
ers will flash twice and a buzzer
will sound.
● When the power back door is dis-
abled, the power back door will
not operate but can be opened
and closed manually.
● When the power back door is
opening/closing, if the power back
door becomes obstructed, opera-
tion will stop.
■ Jam protection function
Sensors are installed on the right
and left sides of the power back
door. When the door is automati-
cally closing and the sensors are
pushed due to an object being
clamped, etc., the jam protection
function operates.
From that position the door auto-
matically moves a little in the oppo-
site direction and then the function
stops.
■ Back door reserve lock function
This function reserves the locking of
the power back door when the
power back door is open. If the fol-
lowing operations are performed, all
of the doors except the power back
door will lock and then the power
back door will lock when it is com-
pletely closed.
1 Close all of the doors, except the
back door.
2 Perform an automatic closing
operation of the power back door
and lock the doors using the
wireless remote control (P.11 5)
or smart key system (P. 11 5 )
while the power back door is
closing.
A buzzer sounds and the emer-
gency flashers flash to indicate that
all the doors have been closed and
locked.
● If the electronic key is placed
inside the vehicle after starting a
close operation via the door
reserve lock function, the elec-
tronic key may become locked
inside the vehicle.
● If the back door does not fully
close due to the operation of the
jam protection function, etc., while
the back door is automatically
closing after a door reserve lock
operation is performed, the door
reserve lock function is canceled
and all the doors will unlock.
● Before leaving the vehicle, make
sure that all the doors are closed
and locked.
■ Kick sensor operating condi-
tions (vehicles with a Hands
Free Power Back Door)
● When the kick sensor operation
setting is turned on (P.515) and
the engine switch is turned off.
● When an electronic key is carried
within the operation detection
area.
■ Situations in which the Hands
Free Power Back Door may not
operate properly (if equipped)
In the following situations, the
Hands Free Power Back Door may
not operate properly:
● When a foot remains under the
rear bumper.
Loading ...
Loading ...
Loading ...