Loading ...
Loading ...
Loading ...
47
GEAppliances.com
Problem Possible Causes What To Do
Excessive smoking • On models with touch pads, touch the Clear/Off pad.
On models with an OVEN TEMP knob, turn it to OFF.
Open the windows to rid the room of smoke. Wait until
the SELF CLEAN light goes off. Wipe up the excess soil
and reset the clean cycle.
Oven door will not open • Allow the oven to cool below locking temperature.
after a clean cycle
Oven not clean after • See the Using the self-cleaning oven section.
a clean cycle
• Clean up heavy spillovers before starting the clean cycle.
Heavily soiled ovens may need to self-clean again or for
a longer period of time.
Oven door will not • Allow the oven to cool below locking temperature.
unlock (on models Do not lock the door with the door latch except when
with a door latch) using the self-clean feature.
Self-clean light (on • Set the OVEN TEMP knob to CLEAN. See the Using the
some models) blinks self-cleaning oven section.
when trying to set a
• Move the latch to the right as far as it will go. See the
Using the self-cleaning oven section.
Self-clean light (on • Turn the OVEN TEMP knob to OFF and move the latch
some models) blinks to the left as far as it will go. Reset the range controls
during self-clean cycle to the desired settings. See the Using the self-cleaning
oven section.
“Door” appears in the • Move the latch handle all the way to the right.
display (on some models)
• Move the latch handle to the right only when setting
the self-cleaning cycle.
“F—” and a number or • The latch may have been moved, even if only slightly,
letter flash in the display from the locked position. Make sure the latch is moved
(on some models) to the right as far as it will go.
• Touch the Clear/Off pad. Allow the oven to cool for
one hour. Put the oven back into operation.
• Disconnect all power to the range for 5 minutes
and then reconnect power. If the function error
code repeats, call for service.
Loading ...
Loading ...
Loading ...