Loading ...
Loading ...
Loading ...
45
Before you call for service… GEAppliances.com
Problem Possible Causes What To Do
Top burners do not light • Make sure electrical plug is plugged into a live, properly
or do not burn evenly grounded outlet.
• Remove the burners (on models with standard twin
burners) or burner heads and caps (on models with
sealed burners) and clean them with a sewing needle
or twist-tie. Make sure you do not enlarge the holes.
On sealed burner models, check and clean the electrode
area for burned-on food or grease.
• Make sure the burner parts are installed correctly.
See the Care and cleaning of the range section.
Burner flames very • If range is connected to LP gas, contact the person
large or yellow who installed your range or made the conversion.
Surface burners light • To check the oven gas shut-off valve on sealed burner
models, remove the warming drawer, storage drawer or
kick panel (see the Care and cleaning of the range section)
and look for the gas shut-off lever at the back of the range.
•
To check the oven gas shut-off valve on standard twin burner
models, raise the cooktop and look for the gas shut-off
lever at the extreme right rear corner. Follow the directions in
box A or B that match your regulator type.
• Touch the pad and desired temperature
or the Self Clean pad and desired clean time.
start time (on some models)
Clock and timer • Make sure electrical plug is plugged into a live,
do not work properly grounded outlet.
(on some models)
• Replace the fuse or reset the circuit breaker.
• See the section.
Lever is
shown closed.
PULL TO OPEN.
Lever is shown closed.
PULL TO OPEN.
Lever is shown closed.
PULL TO OPEN.
Loading ...
Loading ...
Loading ...