Loading ...
Loading ...
Loading ...
Turn all controls OFF before removing the
burner parts and drip pans (if so equipped).
The burner grates, caps, burner heads and drip
pans (if so equipped) can be lifted off, making
them easy to clean.
CAUTION:
NOTE:
The electrode of the spark igniter is
exposed when the burner head is
removed. When one burner is turned
to LITE, all the burners spark. Do not
attempt to disassemble or clean around
any burner while another burner is on.
An electric shock may result, which could
cause you to knock over hot cookware.
27
Grate
Burner head
Burner cap
Cooktop
Sealed Burner Assemblies
GEAppliances.com
Drip pan (if
so equipped)
Electrode
Electrode
Standard Twin Burner Assemblies
On models with standard twin burners, the
cooktop lifts up for easy access.
Turn all controls OFF before removing burner
parts and drip pans (if so equipped).
The burner grates and drip pans (if so equipped)
can be lifted off, making them easy to clean.
The holes in the surface burners of your range
must be kept clean at all times for proper
ignition and an even, unhampered flame.
You should clean the surface burners routinely,
especially after bad spillovers, which could clog
these holes.
Wipe off surface burners. If heavy spillover
occurs, remove the surface burners from the
range. Burners lift out for cleaning. Lift up the
cooktop and then lift out the surface burners.
To remove burned-on food, soak the surface
burner in a solution of mild liquid detergent and
hot water. Soak the surface burner for 20 to 30
minutes.
For more stubborn stains, use a cleanser like
Soft Scrub
®
brand or Bon Ami
®
brand. Rinse well
to remove any traces of the cleanser that might
clog the surface burner openings.
Do not use steel wool because it will clog the
surface burner openings and scratch the
surface burners. If the holes become clogged,
clean them with a sewing needle or twist-tie.
Before putting the surface burner back, shake
out excess water and then dry it thoroughly by
setting it in a warm oven for 30 minutes. Then
place it back in the range, making sure it is
properly seated and level.
Check the flame pattern of each burner. If the
flames are “jumpy” (not steady), clean the holes
again with a sewing needle or twist-tie.
Grate
Drip pan (if so equipped)
Surface burner
CAUTION:
Do not operate the cooktop without all
burner parts, drip pans (if so equipped)
and grates in place.
Clean these holes thoroughly on each
burner.
Loading ...
Loading ...
Loading ...