Loading ...
Loading ...
Loading ...
▷ After several minutes, if no operation takes
place on the vehicle.
▷ If the charge state of the vehicle battery is
low.
▷ Depending on the setting via iDrive, if one of
the front doors is opened when exiting the
vehicle.
The idle state is not automatically established
while a phone call is active.
Establishing idle state when
opening the front doors
Via iDrive:
1.
"My Vehicle"
2. "Vehicle settings"
3. "Doors/Key"
4. "Turn off after door opening"
Manual idle state
To establish idle state in the vehicle after end of
trip:
Hold button down until the OFF
indicator on the instrument clus‐
ter goes out.
Standby state
Concept
When standby state is switched on, most func‐
tions can be used while the vehicle is stationary.
Desired settings can be adjusted.
General information
The vehicle is in the standby state after the front
doors are opened from the outside.
Display in the instrument cluster
OFF is displayed in the instru‐
ment cluster. The drivetrain is
switched off and standby state
switched on.
Drive-ready state
Concept
Switching on drive-ready state corresponds to
starting the engine.
General information
Some functions, such as DSC Dynamic Stability
Control, can only be used with drive-ready state
switched on.
Follow further information on the drive-ready
state, refer to page 120.
Switching on drive-ready state
Drive-ready state is switched on
via the Start/Stop button:
1.
Depress the brake pedal.
2. Press the Start/Stop button.
Seite 40
AT A GLANCE
Idle state, standby state, and drive-ready state
40
Online Edition for Part no. 01402722630 - VI/18
Loading ...
Loading ...
Loading ...