Loading ...
Loading ...
Loading ...
Switching off drive-ready state
Steptronic transmission:
1. Engage selector lever position P with the ve‐
hicle stopped.
2. Press the Start/Stop button.
The engine is switched off.
3. Set the parking brake.
Auto Start/Stop function
The Auto Start/Stop function switches the en‐
gine off automatically while stationary to save
fuel. The engine starts automatically under the
following preconditions:
Steptronic transmission:
▷ By releasing the brake pedal.
▷ When Automatic Hold is activated: press the
accelerator pedal.
Parking brake
Setting
Pull the switch.
The LED and indicator light light up.
Releasing
With drive-ready state switched on:
Steptronic transmission: press the switch
while the brake is pressed or selector lever posi‐
tion P is set.
The LED and indicator light go out.
The parking brake is released.
Parking
The parking brake is automatically set if the vehi‐
cle is being held by Automatic Hold and the
drive-ready state is switched off or the vehicle is
exited.
Steptronic transmission
Engaging selector lever position D,
N, R
▷ Drive mode D.
▷ Neutral N.
▷ Reverse R.
With the driver's safety belt fastened, briefly push
the selector lever in the desired direction, past a
resistance point, if needed. The selector lever re‐
turns to the center position in each case.
To prevent the vehicle from creeping after you
select a drive mode or reverse, maintain pressure
on the brake pedal until you are ready to start.
A selector lever lock prevents the inadvertent
shifting to selector lever position R or the inad‐
vertent shifting from selector lever position P.
Engage selector lever position R only when the
vehicle is stationary.
Releasing the selector lever lock
Press the button.
Seite 24
QUICK REFERENCE
Your BMW at a glance
24
Online Edition for Part no. 01402722630 - VI/18
Loading ...
Loading ...
Loading ...