Loading ...
Loading ...
Loading ...
This phenomenon is referred to as hydroplaning.
It is characterized by a partial or complete loss of
contact between the tires and the road surface,
ultimately undermining your ability to steer and
brake the vehicle.
Driving through water
General information
When driving through water, follow the following:
▷ Drive through calm water only.
▷ Drive through water only if it is not deeper
than maximum 9.8 inches/25 cm.
▷ Drive through water no faster than walking
speed, up to 3 mph/5 km/h.
Safety information
NOTICE
When driving too quickly through too deep wa‐
ter, water can enter into the engine compart‐
ment, the electrical system or the transmission.
There is a risk of damage to property. When
driving through water, do not exceed the maxi‐
mum indicated water level and the maximum
speed for driving through water.
Braking safely
General information
The vehicle is equipped with the Antilock Brake
System ABS as a standard feature.
Perform an emergency stop in situations that re‐
quire such.
Steering is still responsive. You can still avoid any
obstacles with a minimum of steering effort.
Pulsation of the brake pedal and sounds from the
hydraulic circuits indicate that the Antilock Brake
System ABS is in its active mode.
In certain braking situations, the perforated brake
discs can emit functional noises. However, func‐
tional noises have no effect on the performance
and operational reliability of the brake.
Objects in the area around the
pedals
WARNING
Objects in the driver's floor area can limit the
pedal distance or block a depressed pedal.
There is a risk of an accident. Stow objects in
the vehicle such that they are secured and can‐
not enter into the driver's floor area. Use floor
mats that are suitable for the vehicle and can
be safely attached to the floor. Do not use
loose floor mats and do not layer several floor
mats. Make sure that there is sufficient clear‐
ance for the pedals. Ensure that the floor mats
are securely fastened again after they were re‐
moved, for instance for cleaning.
Driving in wet conditions
When roads are wet, salted, or in heavy rain, gen‐
tly press the brake pedal every few miles.
Ensure that this action does not endanger other
traffic.
The heat generated during braking dries brake
discs and brake pads and protects them against
corrosion.
In this way braking efficiency will be available
when you need it.
Hills
General information
Drive long or steep downhill gradients in the gear
that requires least braking effort. Otherwise, the
brakes may overheat and reduce brake effi‐
ciency.
You can increase the engine's braking effect by
shifting down, going all the way to first gear, if
needed.
Seite 276
DRIVING TIPS
Things to remember when driving
276
Online Edition for Part no. 01402722630 - VI/18
Loading ...
Loading ...
Loading ...