Loading ...
Loading ...
Loading ...
A list of all activation points is displayed.
Renaming or deleting activation points
1.
Press button.
2. Move the Controller to the left.
3. "Show activation points"
A list of all activation points is displayed.
4. Select an activation point as needed.
5.
▷ "Rename"
▷ "Delete this activation point"
▷ "Delete all activation points"
Setting brightness and contrast
Brightness and contrast can be adjusted with
Surround View or Panorama View switched on.
Via iDrive:
1.
Move the Controller to the left.
2.
▷ "Brightness"
▷ "Contrast"
3. Set the desired value.
Functional limitations
The system can be used only to a limited extent
in the following situations:
▷ In poor light.
▷ In case of soiled cameras.
▷ With a door open.
▷ With the tailgate open.
▷ With exterior mirrors folded in.
Gray hatched areas with symbol, for instance
open door, in the camera image mark areas that
are currently not displayed.
System limits
Non-visible areas
Because of the camera angle, the areas under
the vehicle cannot be viewed by the cameras.
Detection of objects
Very low obstacles as well as high, protruding
objects such as ledges may not be detected by
the system.
Some assistance functions also consider data
from the PDC Park Distance Control.
Follow, refer to page 212, the notes in the PDC
Park Distance Control chapter.
The objects displayed on the Control Display
may be closer than they appear. Do not estimate
the distance from the objects on the display.
Malfunction
A camera malfunction is displayed on the Control
Display.
A yellow symbol is displayed and the re‐
cording range of the malfunctioning cam‐
era is displayed in black on the Control
Display.
Remote 3D View
Concept
Using the BMW Connected App and the camera
images from Surround View, the vehicle sur‐
roundings can be displayed on a mobile device,
for instance a smartphone.
The function displays a momentary view of the
situation.
Functional requirements
▷ Data transmission must be activated, refer to
page 60.
▷ BMW Connected App must be installed on
the mobile device.
Switching the function on/off
Via iDrive:
1.
With the standby state switched on: "My
Vehicle"
2. "iDrive settings"
Seite 225
Driver assistance systems
CONTROLS
225
Online Edition for Part no. 01402722630 - VI/18
Loading ...
Loading ...
Loading ...