Loading ...
Loading ...
Loading ...
Control elements on the interior
mirror
▷ Buttons, arrow 1.
▷ LED, arrow 2.
▷ The hand-held transmitter, arrow 3, is re‐
quired for programming.
Programming
General information
1.
Switch on standby state.
2. Initial setup:
Press and hold the two outer buttons on the
interior mirror simultaneously for approxi‐
mately 10 seconds until the LED flashes
green rapidly. This erases all programming of
the buttons on the interior mirror.
3. Press the interior mirror button to be pro‐
grammed. The LED on the interior mirror will
slowly begin flashing orange.
4. Hold the hand-held transmitter for the system
to be controlled approx. 1 to 3 in/2.5 to 8 cm
away from the buttons of the interior mirror.
The required distance depends on the hand-
held transmitter.
5. Press and hold the button of the desired
function on the hand-held transmitter.
6. As soon as the LED flashes green more rap‐
idly or lights up continuously, release the but‐
tons. Green light indicates that the button on
the interior mirror has been programmed.
Faster green flashing indicates that it is a roll‐
ing code wireless system.
If the LED does not flash faster after at least
60 seconds, change the distance between
the interior mirror and the hand-held trans‐
mitter and repeat the step. Several more at‐
tempts at different distances may be neces‐
sary. Wait at least 15 seconds between
attempts.
Canada: if programming with the hand-held
transmitter was interrupted, hold down the in‐
terior mirror button and repeatedly press and
release the hand-held transmitter button for
2 seconds.
7. To program other functions on other buttons,
repeat steps 3 to 5.
The systems can be controlled using the interior
mirror buttons.
Special feature of the rolling code
wireless system
If you are unable to operate the system after re‐
peated programming, please check if the system
to be controlled features a rolling code radio sys‐
tem.
Read the system's owner's manual, or press the
programmed button on the interior mirror longer.
If the LED on the interior mirror starts flashing
rapidly and then stays lit constantly for 2 sec‐
onds, the system features a rolling code radio
system. Flashing and continuous illumination of
the LED will repeat for approximately 20 sec‐
onds.
For systems with a rolling code radio system, the
integrated Universal Remote Control and the
system also have to be synchronized.
Please read the owner's manual to find out how
to synchronize the system.
Synchronizing is easier with the aid of a second
person.
Seite 254
CONTROLS
Interior equipment
254
Online Edition for Part no. 01402722630 - VI/18
Loading ...
Loading ...
Loading ...